Description
Aquaphalt® is a revolutionary, high performance, flexible, reactive repair product for use in repairing asphalt and concrete road surfaces. Aquaphalt® reacts with water to provide a permanent repair solution. All sizes of Aquaphalt® are free of solvents or volatile organic compounds (VOC’s). Aquaphalt® comes in three (3) sizes (4.0mm, 6.0mm, & 9.0mm) for surface, intermediate or base repairs for any type of asphalt or concrete road repair.
Applications: Highways (asphalt or concrete), Runways/Taxiways/Aprons, Bridge Decks, Manhole repairs, Potholes, Utility Cuts, Parking Lots, Driveways, Tennis Courts, Pathways
Performance Features:
- Permanent Solution – Aquaphalt® is comparable to typical hot mix asphalt pavements in quality and unlike other conventional cold patch asphalt products which never deliver a truly permanent repair.
- Cost Effective – Aquaphalt® saves time and money by eliminating costly repeat repairs.
- Environmentally Sustainable – Aquaphalt® contains no toxic solvents of VOC’s, making it friendlier to the environment.
Directions for Use: Remove all loose material from area to be repaired. Place Aquaphalt® in the patch and level with a rake or trowel. Allow 0.5” -1.0” additional height for compaction. Saturate with water (use approx. 1/2 gallon of water to 50 lbs. Aquaphalt®) and compact. If the depth of the pothole is greater than 2-3”, it is advisable to fill the hole in two layers. In colder weather a freezing point suppression additive may be added to the water prior to saturation (i.e. road brine, salt water, etc.).
Clean Up: Use Automotive hand cleaners on hands and tools. Tools may also be cleaned with light oil, mineral spirits or vegetable oil.
Storage and Handling: Each bucket of Aquaphalt® contains approximately 50 lbs. of material. Store Indoors in cool, dry conditions. Avoid direct sunlight and/or exposure to freezing. Aquaphalt® can be applied in freezing conditions, but workability is best when it is stored indoors.